Updating resource custom field values via REST in Microsoft Flow

Flow is a great (one day) replacement for SharePoint Designer workflows, however at the moment the Project Online connectors are still in “preview” and as such as woefully inadequate. In my view the biggest omission is the inability to set custom fields, among many other failings this one is pretty much always step one or two on any workflow I have ever needed to create for Project Server.

You may have seen some MS demos where they show a quick easy way to circumvent this by using the HTTP action, unfortunately I’ve yet to find any online examples of that so I’m going to write one myself. This article focuses on Enterprise Resource custom fields but applies equally well to Task custom fields. However, the process is actually simpler for Project level custom fields and Paul Mather has blogged on the topic before here. Although he doesn’t cover Flow in that article, you can convert his JavaScript code to a JSON body and use it as as below. There’s also this StackExchange post that covers Project fields using a different method.

Updating Enterprise Resource fields via REST

It turns out this is not supported!

Please correct me if I’m wrong here, I’ve spent many hours looking for a solution for this from MS to no avail!

Well for me I figure if MS released an API 5 years ago and never got around to finishing it then supported or not I need a way to do my job. Fortunately it is possible via CSOM/JSOM to do this, and by understanding how all the client side API’s work you will see that it is possible and (arguably) fully supported to do this via REST using the internal methods used by CSOM/JSOM.

Updated Enterprise Resource default fields via REST

Before we look at custom fields lets cover how to set the default fields such as; Group, Email, etc. These can be set via the normal REST endpoint, and frankly this is how it also *should* be possible to set custom fields.

Assuming the resource exists and you want to update it by GUID, the following HTTP PATCH request will do it:

PATCH /sites/pwa/_api/ProjectServer/EnterpriseResources('[guid]') HTTP/1.1
Host: contoso.sharepoint.com
Accept: application/json; odata=verbose
Content-Type: application/json; odata=verbose

{
    "__metadata": {
      "type": "PS.EnterpriseResource"
    }, 
    "Group": "Test group",
    "Email": "[email protected]"
}

That’s a raw HTTP request from PostMan, the important bits are the JSON and the PATCH type of request, yes a standard POST or PUT request will not work. In that JSON body of the request you can list multiple custom fields as long as you adhere to correct JSON syntax, for the full list of field names, browse to the endpoint in your browser: /sites/pwa/_api/ProjectServer/EnterpriseResources.

However if you look at the endpoints you’ll see the custom field values referenced by internal name, e.g.: Custom_x005f_000039b78bbe4ceb82c4fa8c0c400284

Unfortunately it is not possible to add to your JSON the CF value, like: Custom_x005f_000039b78bbe4ceb82c4fa8c0c400284″: “Text value for field” as a result we have to work a bit harder.

Enter the ProcessQuery endpoint

(If you’re not interested in the why, but just the how to do this, you may want to skip to the next section!)

If you’re familiar with Fiddler traces of any of the SharePoint client side object models then you will have seen that all of the API calls made are translated into HTTP calls to an internal endpoint: _vti_bin/client.svc/ProcessQuery while not documented anywhere I have found, you can see that basically this is where the ClientContext.ExecuteQueryAsync(…) call from either CSOM or JSOM is performing the requested operation.

The ProcessQuery endpoint accepts a HTTP POST request with a body that looks something like this:

<Request xmlns="http://schemas.microsoft.com/sharepoint/clientquery/2009" SchemaVersion="15.0.0.0" LibraryVersion="16.0.0.0" ApplicationName="Javascript Library">
    <Actions>
        <Method Name="SetCustomFieldValue" Id="9" ObjectPathId="6">
            <Parameters>
                <Parameter Type="String">Custom_f825c154928ae81180da00155df8aa23</Parameter>
                <Parameter Type="String">text field value</Parameter>
            </Parameters>
        </Method>
        <Method Name="Update" Id="10" ObjectPathId="6" />
    </Actions>
    <ObjectPaths>
        <Method Id="6" ParentId="4" Name="GetById">
            <Parameters>
                <Parameter Type="String">5e658680-838a-e811-80df-00155df8b01b</Parameter>
            </Parameters>
        </Method>
        <Property Id="4" ParentId="0" Name="EnterpriseResources" />
        <Constructor Id="0" TypeId="{3a609e5f-e2a1-497c-87a2-e5e8a781c096}" />
    </ObjectPaths>
</Request>

That happens to be the query syntax to set a single text custom field for a resource. If you read through the content you can see (in order of Id properties) what is happening, in short the above translates to the following (pseudo) CSOM code:

var res = EnterpriseResources.GetById([guid]);
res.SetCustomFieldValue("Custom_f825...", "text field value");
EnterpriseResources.Update();

Pretty cool huh? :)

It get’s better, as if you trace in fiddler some code that does multiple things, like for example setting 3 or 4 custom field values, you will see that they are all batched into a single POST query just as you’d expect when using ExecuteQueryAsync in your code. The change in the method above is simply additional <Action> elements in the XML, one for each call to SetCustomFieldValue (note: incrementing the Id property is also necessary).

The remainder of that XML deserves a short explanation, ignoring the XML schema stuff the only other variable defined in the above example is a GUID: {3a609e5f-e2a1-497c-87a2-e5e8a781c096}. This GUID refers to the ServerTypeId that is defined in the Microsoft.ProjectServer.Client.dll file specifically the PS.ProjectServer constructor, and importantly “EnterpriseResources” is a public property of that class. So with that in mind you could re-use this GUID and make calls to any other public property to construct the call you need.

I prefer to cheat, and simply write a small snippet of JSOM (or CSOM) code that makes the call I want in REST, then use fiddler to get the XML body created when I make that call.

Calling a Project Online API from Flow

Now that we know what the HTTP request needs to look like we can start building a flow. Not so long ago this was much more difficult as we had to worry about OAuth2 and AzureAD apps and such, but now thankfully MS have added a new action to the SharePoint actions list which we are going to use:

SharePoint - Send an HTTP request to SharePoint action

I’ve created a new flow with a Project Online trigger “When a new resource is created”, and then added the above HTTP request action.

You need to populate the following values:

  • Site Address: URL to your PWA
  • Method: POST (for custom fields, or if out of the box fields PATCH)
  • Uri: _vti_bin/client.svc/ProcessQuery
  • Headers:
    • Accept: application/json; odata=verbose
    • Content-Type: text/xml
  • Body: [Our XML body from the previous step]

Note: The header for Content-Type must be “text/xml” to match the content, if you were updating a default field using the JSON body from the beginning of this article, this would also be set to “application/json; odata=verbose”.

Thanks to the SharePoint HTTP action we don’t have to worry about authentication here, so actually that is it! Well almost.

Parameterizing the Flow action

Adding some variables to the flow allows us to parameterize the action based on whatever logic you want, once that’s done replace the values in the XML like this:

Important: Notice I have stripped the XML of tabs, spaces and line endings! This is required, if you don’t do that you will get an Unknown Error on larger query bodies.

Done.

What about default fields?

For completeness if you wanted to update the internal Group field for a resource, the http request action would look like this:

Note the resource GUID is in the URI and both the Method and Headers are different!

What about Lookup Table Values?

Lookup table value updates via REST have the same requirements as updating those values via JSOM (or CSOM), see my earlier post – Updating Lookup Table values using JSOM – for more on that.

In summary though, we need to first identify the lookup entry internal name, something like “Entry_412bb4bd5661e711a989000d3a28f1ff” then we need to pass that to the request as an array.

The request body now will look like this:

<Request xmlns="http://schemas.microsoft.com/sharepoint/clientquery/2009" SchemaVersion="15.0.0.0" LibraryVersion="16.0.0.0" ApplicationName="Javascript Library">
    <Actions>
        <Method Name="SetCustomFieldValue" Id="13" ObjectPathId="8">
            <Parameters>
                <Parameter Type="String">Custom_f825c154928ae81180da00155df8aa23</Parameter>
                <Parameter Type="String">text field value</Parameter>
            </Parameters>
        </Method>
        <Method Name="SetCustomFieldValue" Id="14" ObjectPathId="8">
            <Parameters>
                <Parameter Type="String">Custom_000039b78bbe4ceb82c4fa8c0c400284</Parameter>
                <Parameter Type="Array">
                    <Object Type="String">Entry_412bb4bd5661e711a989000d3a28f1ff</Object>
                </Parameter>
            </Parameters>
        </Method>
        <Method Name="Update" Id="15" ObjectPathId="6" />
    </Actions>
    <ObjectPaths>
        <Property Id="6" ParentId="0" Name="EnterpriseResources" />
        <Method Id="8" ParentId="6" Name="GetById">
            <Parameters>
                <Parameter Type="String">0bd67eed-538e-e811-aadb-000d3a28f1ff</Parameter>
            </Parameters>
        </Method>
        <Constructor Id="0" TypeId="{3a609e5f-e2a1-497c-87a2-e5e8a781c096}" />
    </ObjectPaths>
</Request>

I’ve left in the previous example to demonstrate how to set two custom fields at once, but the important part here is lines 9 – 16 which include the additional syntax you will need to set an array type value. Once again passing the value as an array is required for both single value lookups as well as multi-value.

Final words

This ProcessQuery endpoint is not publicly documented by Microsoft but a long time ago I discussed this with some people from the product group and their response was that while not officially supported, it is supported in the sense that it will not change until JSOM and CSOM are both disabled, as that’s how they internally work.

So use it with the usual warnings, but biggest of all: I take no responsibility or offer no support for how you use the above. Feel free to ask a question in the comments below, if I can help I will, but no guarantees.

 

 

Share and Enjoy !

Shares

Creating Project Tasks in a SPD Workflow

A lot has changed in Project Server workflows in the past few years, with the release of SharePoint 2013 and Office 365 the world of workflow completely changed. Fortunately SharePoint Designer’s (SPD) evolution into an actual usable tool for creating Project Server workflows filled the huge gap that previously existed for Project Server consultants and implementers, however at the same time the changes created a new major gap by completely blocking any sort of custom code in any workflows!

All is not lost though, with the changes in workflow we also received a handy set of new RESTful API’s to use so in theory at least we should be able to do a fair bit that previously required C# code via pure non-code-based SharePoint Designer workflows.

 

Putting the theory to the test

I have a theory with working with customers, that whatever is possible through the out-of-the-box features of a Microsoft product will never be enough after the first workshop. It seems that I like saying yes to customers. ;)

Scenario

My customer’s business process dictates that based on the result of an approval gateway the Microsoft Project schedule will require changes, specifically additional tasks need to be added to the schedule based on custom fields (or even a SharePoint list).

As there are no SharePoint Designer workflow actions that update project tasks, this would fall into the category of workflow built with Visual Studio (based on the MSDN: Decision tree: SharePoint Designer vs. Visual Studio), however the reality is that when you get down to it Visual Studio workflows share fundamentally the same limitation as those built in SPD i.e. declarative, no code workflows only (See the bottom of this article about some more practical limitations).

Solution

Let’s use my new favourite workflow action – the Call HTTP Web Service activity – in conjunction with the RESTful CSOM API for Project Server to actually create some tasks directly from SPD as follows;

  1. Get our task data – We’ll need task name, duration, start date, etc.
  2. Prepare our REST request – a bit of HTTP request header / body knowledge will be required but can be borrowed from some other examples like this one: Create a project site based on a custom field value.
  3. Post the http request and handle the result.

I’m going to skip a lot of details for this article and just focus on the above interesting bits, of course in the real world you’ll have to worry about publishing and checking out the project and although I don’t include those I will discuss check-out at least below as it is important. Additionally I will just create a single static task in this example, ideally you would get the values from custom fields, or better yet get a list of tasks to create using a separate OData http request then loop through creating each one.

 

PWA Workflow Configuration

Let’s keep this simple, you can use your imagination as to how this would fit into your requirement but I will even omit the approval and any other normal phases and stages.

Phases (Using Defaults):

1. Create

2. Manage

Stages:

1.1 Project Details – where we will get basic project details.

1.2 Create Tasks – where we will create the task(s) in the workflow.

2.1 Manage – we’re done, as you were..

wfstages

 

Begin the SharePoint Designer Workflow

Here’s one I prepared earlier:

basicSPD

 

Okay so I’m assuming that this is not your first ever workflow, so the above is the following: Stage transition including basic history / status messages, plus in [stage 1.2] we are manually (and statically!) creating a dictionary of properties for the task we are going to add. (This is static and as per my comment above you probably want to dynamically populate this dictionary even by just setting the value(s) to the value of specific custom fields.)

 

Note on Check-in / Check-out

The project will need to be checked out to update the schedule, fact. However SPD workflow runs in the context of the user who started it, i.e. the PM in most cases. So in this example I’m going to assume that the project is currently checked-out by the PM and just go ahead and do the update. You may be surprised but this will actually work, of course in reality you will have to check for this and if an error occurs then retry after checking-out – or conversely you could require the project be checked in before submitting and then do the check-out / check-in every time.

 

Preparing the new task dictionary

SPD uses extensively the Dictionary object in the HTTP Activity, both for the headers, body and return values, so to create our task we are going to need a dictionary formatted in the format expected by the Project Server REST API for creating new tasks. This is where it starts getting interesting.

It turns out that this is easier that you might have guessed, see those properties of the task; Name, Duration, ParentId, etc? Guess what dictionary values we’ll need? :)

dict1a

On the left is the complete dictionary, and on the right is the properties of the first “Name” row expanded. Surely it’s not that simple? For once yes it is.

So create the dictionary from the menu Action – Build Dictionary, populate the dictionary with the fields you want, specifically you’ll need Task Name as a minimum, and importantly pay attention to the data-type, for this the MSDN link above is handy, names are strings, dates are dates, parent task Id is a GUID, etc. (Note: Duration is text! Hello manual tasks!)

 

Prepare the HTTP request

Now we’ll need another dictionary for the request header, if you’ve previously read the MSDN article on using the Bulk update of custom field values, or my article on creating a Project Site based on a custom field, then you’ll see here we need the same thing.

dic2

Two string entries needed:

Accept: application/json; odata=verbose

Content-Type: application/json; odata=verbose

The great thing about SPD workflows is that it takes care of the authentication and any other headers, so that is everything that we need.

 

Submitting the HTTP request

Now we get to use my favourite activity: Call HTTP Web Servie.

Insert the activity, first click the this URL and we’ll build the request URL by basically calling the following REST resource endpoint: MSDN: PS.DraftTaskCollection.add Method, note from MSDN the syntax is as follows:

POST http://<sitecollection>/<site>/_api/ProjectServer/Projects('projectid')/Draft/Tasks/add(parameters)

So we need to dynamically create the URL as follows;

urlbuilder

  1. Use lookup params to insert the Workflow context: Current Site URL
  2. Append the text “_api/ProjectServer/Projects(”)/Draft/Tasks/add()
  3. Then insert the Project Data:Project UID into the text.
  4. Finally (importantly) Select HTTP POST as the HTTP method.

Next right click the activity and open properties to assign the request header and body, and while there specify something for at least the response content (so we can check the return http code).

httpReq

 

Check the Response

Okay we’ve made our REST call, now we just log the response to the status field, and to help with troubleshooting in the case where “responseCode” is not equal to “OK”, I actually log the full response to the history list.

(Warning! Logging to the history list like this has a max length of 255 characters, so if the error message exceeds that you will get another error and the workflow will fail! Use the Extract Substring activity to avoid this.)

You should now have something looking like this:

completeWK

Finally save and publish the workflow and you’re ready to go.

 

Time to test

Associate the workflow to an EPT, then create a project. As we’re not doing anything special in the first stage submit and you should see the workflow status info as “Building project schedule…” (looking good so far!).

Give it a minute and then refresh the page:

wftest2

 

Better yet, open the Schedule PDP and you will see our new task:

scheduleEg1

 

Neat.

Further Thoughts, Experiences and Limitations

This method opens up quite a few options when it comes to SharePoint Designer workflows, the ability to interact with all levels of the Project Server API via a workflow opens the possibility of working with any aspect of project data (tasks, assignments, resources, etc?).

However my experience of pushing this to the limit does raise some significant limitations:

  • SPD Workflows can contain a maximum of 50 local variables.

This sounds like a lot but it doesn’t take long before you’re needing to re-use variables, especially if you’re like me and you like nice verbose and unmistakable variable names. (Fifty max is killing me! ;))

  • Dictionaries are great but you can’t dynamically update them.

This is where we see the true limitations of SPD vs Visual Studio, doing a simple loop in code then adding the results to the end of a collection (array / dictionary etc) is pretty basic stuff, but with SPD can’t be done. You can loop yes sure, but you can only build a dictionary either statically (like I did above), or from the results of a query such as a http OData request.

  • Finally as a developer I’m going to call out this as a major limitation; single concern / no source control. (Ahhh!)

While creating some large workflows you don’t know how many times I have panic’ed thinking that an overly-long and unresponsive save or publish of my work has just crashed SPD and corrupted the whole workflow (it actually happened at least once), give me source control and a proper separation of concerns and let me sleep at night, please. :)

 

Recommended Reading

Here’s a great article on working with SPD dictionaries that I’d recommend: How to work with dictionaries in SharePoint 2013 and Office 365 workflow)

Complete basic operations using SharePoint 2013 REST endpoints

PS namespace MSDN reference (want to know what REST endpoints are available for Project Server?)

 

Download the solution

Create-Project-Tasks-Workflow.zip

 

Enjoy!

Share and Enjoy !

Shares

Customising PDP Navigation

Despite the best efforts of Microsoft with the UI design of SharePoint / PWA, I frequently get requests from customers to make changes / additions to the standard UI elements such as the ribbon menu, which – if you’re reading Microsoft – people very often still just “don’t get”.

So a small thing I came across while digging around in the internals of the Project Server undocumented JavaScript was an easy way to re-use the standard functions of the ribbons in your own html / JavaScript.

(Note this is not a post about ribbon customisation, see Alex’s great post series here if that’s what you’re after.)

 

Example: ever wanted buttons at the bottom of a long form?

screenbtns

Simple yet effective.

 

Source html

<div id="myFooterBtns"><span>
    <input type="button" value="< Previous Page" onclick="PDPInfrastructure.GotoPreviousPDP();">
    <input type="button" value="Next Page >" onclick="PDPInfrastructure.GotoNextPDP();">
</span>
<span style="float: right;">
    <input type="button" value="Save Project" onclick="PDPButton.SaveData();">
</span></div>

Note the JavaScript function calls which are quite self explanatory: PDPInfrastructure.GotoNextPDP(); etc. As you might guess you can find a similar method for most options (although some are not so simple).

To use: simply save this as a html file somewhere in your site collection and then reference it in a Content Editor Web Part, see here for an example of how to do that.

 

Disclaimer

It may go without saying but I will anyway: This is using undocumented and unsupported internal functions that will undoubtedly change at some point in the future whenever Microsoft feels like it.

You have been warned. But in the meantime keep giving customers what they ask for. :)

 

Share and Enjoy !

Shares

Create a project site based on a custom field value

One of the nice new features recently released on Project Online that will also be available for on-prem sometime in the future (PS 2016 or maybe if we’re lucky 2013 sp2?) is the ability to create custom fields via workflow using the new API CreateProjectSite. While on its own this may be a rather small change what it opens up is the possibility to completely control the Project Site creation which previously had only the out-of-the-box options i.e.; on or off!

So using this new feature I have created a walk-through here to resolve an often asked customer requirement:

How can we create the Project Site using a name other than the Project Name, e.g. a Project Number?

Solution Overview

Note: This solution can be used today on Project Online, but as of yet will not work on Project Server 2013 on-premises.

In order to fulfill this requirement we will need to create a simple two stage workflow and associated Enterprise Project Type to be the default project type.

Stage 1: Project Registration

Used to collect project details including “Project Number” which will be a required field. Other PDP’s such as the project schedule will not be available.

In this stage no project site is available.

Stage 2: Project Execution

First thing upon entering this stage the project site is created using the details from the previous stage (site URL = “Project Number”), then other PDP’s, etc are shown to allow for the project to continue.

Project Online Configuration

I will go through the configuration of PWA for the workflow in brief, if you are not familiar with creating workflows or need further information then I’d recommend the following MSDN How to: How to: Create a Project Server workflow for Demand Management.

Firstly you will need a custom field called “Project Number” that is configured as a Project entity, type Text and Workflow-controlled enabled, as so:

ECF2

Next create / edit the “New Project” PDP, and add the Project Number field to the PDP.

Optionally leave the field out of the PDP and go and install the Nearbaseline ID App which will set the project number in the background once the project is created (ahem shameless plug).

Now create the required Stages and Phases as follows:

workflowStages

Note that in the Project Registration stage the “Project Number” field must be marked required.

Now create an Enterprise Project Type using the New Project Page created above and for now leaving everything else default / blank as you’ll have to come back and associate the EPT with your workflow after the next steps.

Finally configure the default settings to NOT create project sites automatically from PWA Settings > Connected SharePoint Sites > Settings, as follows:

Setting "Allow users to choose" in PWA settings

With that all setup we’re ready to create our workflow in SharePoint Designer.

Workflow Creation in SharePoint Designer

The workflow creation is based on the steps documented in the MSDN guide: Project Online: Bulk update custom fields and create project sites from a workflow, as such I will skip some of the details and suggest you review that article if you have any problems.

Open SharePoint Designer, create a new SharePoint 2013 Workflow – Project Server workflow and add the following:

  1. Insert two stages Project Registration & Project Execution
  2. Optionally set the stage status in the Project Registration stage to WaitingForInput.
  3. Set the transition to go to the Project Execution stage.
    No additional wait for submit event is really required here as the workflow will automatically wait for all required custom fields to be entered before allowing submit.
  4. Now in the Project Execution stage add a step in which you can add the Create Project Site call as documented in the MSDN article.
  5. Finally terminate the workflow as the final transition.

Your workflow should look something like this:

spdWorkflow

The only change from the steps outlined in the MSDN article is in the forth step where the URL is constructed for the CreateSite call, in our case we want that to reference our “Project Number” custom field in the parameter in CreateProjectSite(parameter), so your URL should look like:

createcall

Note: Don’t try to cut and paste those URLs if you do so you will lose the special [%tags%], use the Add or Change Lookup button to insert the tags.

Once your workflow is done, save, publish and return to PWA and associate it with your EPT that you created then test!

Solution Download

Find attached below the SharePoint Designer Workflow solution created above exported as a Visio diagram, note that I cannot provide any guarantees or support for this downloaded Visio file.

Download: Demo Create Project Site from ECF

Screen shot of the workflow in Visio:

visio

 

Hope this is useful to someone out there!

 

Share and Enjoy !

Shares

Project Site Risk List in a PDP Webpart 2013 Version

Back in the days of 2010 there was a Project Site List Viewer WebPart that gave you the ability to show specific lists (Risks, Issues or anything) from a given project’s site in a PDP. While in 2013 on-prem you can still install that solution starter from Fluent-Pro (here), that doesn’t help you with Project Online and not to mention with the dozens of on-prem scenarios where the solution doesn’t work without code modifications. So recently I was asked to solve this problem again and I thought that I’d try to find another way.

Another (simpler) way

Let’s start with a screenshot of the end result:

screen0

Perfect it looks exactly like a typical SharePoint list only in the Project Detail Page for our project – and of course importantly it shows the Risk list from the currently open project.

Reason 9,999 why I love JavaScript

Basically using a small script we can show the actual SharePoint page for the risk list e.g. “/PWA/Project Name/Lists/Risks/AllItems.aspx?isdlg=1” in an iFrame on our PDP. To do that firstly you can see that I’ve added “&isdlg=1” to the URL which tells SharePoint to show the page without the rest of the SharePoint master page and quick launch menu in the frame (which just looks weird), then we need to update the address with the actual project’s name and finally by default the ribbon menu would be shown again in our frame so we need to hide that.

JQuery script

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.2/jquery.min.js"></script>
<script type="text/javascript">
function RenderiFrame (c) {
	document.write('<iframe id="nbDataGridFrame" src="' + c + '" width="100%" height="1400" onload="hideRibbonMnu();">');
	document.write('<p>Your browser does not support iframes.</p>');
	document.write('</iframe>');
}
function runSummaryReport() {
	var projectName = $("[id$=RootAspMenu]").find("[href*=projuid]").first().find(".menu-item-text").text();
		
	var URLString = '/PWA/' + encodeURIComponent(projectName) + '/Lists/Risks/AllItems.aspx?isdlg=1';
	RenderiFrame(URLString);
}
function hideRibbonMnu() {
	var $isFound = $("#nbDataGridFrame").contents().find("#s4-ribbonrow");
	if ($isFound.length > 0 && $isFound.is(":visible")) {	
		$isFound.hide();
	}	
	else {
		setTimeout(hideRibbonMnu, 100);
	}
}
runSummaryReport();
</script>

Okay so I won’t go through it line by line, but in summary what the script needs to do is the following:

  1. Construct the correct URL to the list (Risks in this case) by obtaining the Project Name from the quick launch menu of the current page- Yes I’m assuming the default site naming based on project name!
  2. Passes the encoded URL into a function which renders an iFrame of the specified size.
  3. Finally as a part of the iFrame itself there is an ‘onload’ parameter which calls a function to hide the ribbon menu once the frame is loaded.

Installing the script

If you’ve not used the CEWP much before here are a few reminders on how to create a PDP with this kind of script:

Firstly save the script above to a file named “showListonPDP.html” (note it is .html not .js), then upload that to your PWA site contents where everyone can access it /PWA/SiteAssets/ or /PWA/Site Collection Documents/ etc.

Then create a new PDP as normal and add the Media and Content -> Content Editor web part:

screen1a

 

Now edit the web part properties and paste in the URL of the script:

screen2

Note that the URL must be just the file name, not the full URL, e.g.: “/PWA/SiteAssets/showListonPDP.html”

Now add the PDP to your EPT and go ahead and open a project.

screen0

 

Just one more little thing

Now if you click the new or edit item menus it opens the form in the frame which could be better, fortunately SharePoint lists can be configured to open forms in a dialog, the option can be found from the list settings on the project site itself (obviously you want to do this on your project site template as well), so open your site project, go to the Risks list, and select site settings -> Advanced settings, at the bottom you will find:

screen3

 

Select yes and Ok, now when you go back to the PDP and click New Item this is what you should see:

screen4

 

Neat huh?

 

Share and Enjoy !

Shares

Correcting the alignment of PDP Web Parts

Recently I spoke at a Microsoft Project Server event here in Switzerland on the topic of Extending Project Server and using small pieces of JavaScript with jQuery to make little changes for big effects. One of my demos was to correct the following annoyance that many of us have probably come across but have no out of the box way to fix.

Project Detail Pages column alignment issues

Example

pdp screen 1

 

In yellow I have highlighted the issue that I’m talking about in case it is not obvious in the screenshot. As you see the alignment is actually based on the length of the longest custom field displayed in the web part, so as in the above example where we have used separate webparts to break up the webpage with headings the width of each column is unpredictable.

jQuery to the rescue

This is a great example of using jQuery as it shows how ridiculously simple some things can be to change! So let’s walk through the solution here if you’ve not done this before, as you will see the possible usage of this kind of “fix” is vast.

“Debugging” in Chrome or IE

The first thing you need to do to here is to identify the html element(s) in question, so the easiest way to do that is to use the “Inspect Element” feature available in both IE and Chrome browsers (and probably all others too), you’ll find it on the right click menu

pdp screen 2

When selected the inspect element will open up the developer console of your browser and focus on the specific element under the mouse, in this case the “Description” field text label.

pdp screen 3

Now you can browse the page source and as you see each element is highlighted, neat!

Now we can start using jQuery to select our columns to modify, start by dynamically loading the jQuery library using the following script:

var jq = document.createElement('script');
jq.src = "//ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js";
document.getElementsByTagName('head')[0].appendChild(jq);

Now that we have jQuery available you can again look at the source and think about what we need to ‘select’, in this case we can see that our Description label is in a h3 inside of a table (tbody > tr > td) and specifically it has a class of “ms-formlabel”. Cool so in jQuery we can now select all such elements like this:

$("tr td.ms-formlabel")

Best thing is that being JavaScript all elements are selected and can be used in an array, but even better we can directly update all items like this:

$("tr td.ms-formlabel").width("300px");

Neat hey? If you run that command in the console immediately all the columns will update to be 300px wide!

Permanently applying fix to the page

So now we have our script let’s add it to a Content Editor Web Part (CEWP) on the page itself, to do that we need to wrap our line in some html which loads the jQuery library and runs the script when the page is ready, like this:

<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"></script>
<script type="text/javascript">

$( document ).ready(function() {
	$("tr td.ms-formlabel").width("300px");
})

</script>

Now edit the PDP web part page, and add a Content Editor web part to it, then simply add the above HTML content to the web part HTML source like so:

First add the Content Editor web part and use the Edit Source ribbon option

pdp screen 4

Then paste in our html script

pdp screen 5

Now each time the page is loaded the script is run and all columns are aligned to 300px looking something like this:

pdp screen 6

Enjoy!

Share and Enjoy !

Shares